C20LET + 02M GUM VW gearbox Conversion set

C20LET + 02M Conversion set

VAG Gearbox: GUM (R32 4×4 gearbox)

flat adapter plate : 350euro

angled adapter plate: 550euro (with place for rear mount, for Calibra/Vectra 4×4 subframe only !!!)

Flywheel 600euro (LUK 624331100 clutch set – not included)

right holder: 200 euro (c20let wide belt holder no AC version only)

left holder: 200euro (two steel parts for welding on gearbox)

rear holder: 350euro (include strong polyurethane bushings)

subframe reinforcement plate: 70euro (for fitting and welding on your subframe)

rear diff mount plate: 80euro (for fitting and welding on your rear subframe (calibra/vectra 4×4 only)

price on website without axles

Important: this is not a plug and play kit, it requires a lot of mechanical knowledge and creativity in assembly, we suggest you use it only if you feel up to it or you are a professional tuning workshop

the kit does not require interference with the transmission

this kit requires interference with the body of the car, and the subframe, with the use of the box from the VR6 engine family the Opel engine will be in the neutral position after the conversion is completed (there is no such possibility when using the box from the 1.8turbo family (no less we can also make such an adapter, but then only the adapter and the flywheel fit)

this kit was put on the site because of the increasingly frequent questions about such a drive conversion, it requires a lot of work by professionals and sometimes matching parts from us, in the gallery you can find a lot of photos of our work on such a conversion from 2010/2015.
there is no need to order all the parts we can make the individual parts separately

there is a possibility to make also drive half-shafts, but only after the customer provides (and therefore after the finished assembly of the engine with the box and the drive bridge) the dimensions according to our instructions

axle 350euro/each